Baltijos brasta 20 metų
Shoping cart
0 item(s) - 0.00€
Tyvek® metallized tape 7,5 cm x 25 m

Tyvek® metallized tape 7,5 cm x 25 m

110.00€
Ask about this product

Names: 2060M; Tyvek® Metallized Tape)
Composition of the material: Metallized Tyvek®(HD-PE) acrylic glue and protective paper

Description and application of the product

•    The single sided adhesive metallized tape is meant to interconnect all the metallized membranes Tyvek®, and to correct the damages of the membrane.
•    It is used with all the DuPont™ climatic systems, i.e. Tyvek® Enercor® Wall and AirGuard®     
•    The metallized tape is characterized by high primary adhesion, thus it may be used for adhesion with other materials, e.g., nonwoven materials, plastic, metal, wood, etc.
•    The tape is resistant to aging, humidity and water.

Green


PARAMETERS UNIT NOMINAL VALUE (average)
Roll’s length
m
25
Roll’s width
cm 7,5
Weight (with protective paper)
g/m² 210
Thickness
μm 300
Weight of protective paper
g/m² 110
Resistance to stretching
N / 50 mm 300
Elongation during stretching
% 15
Adherence of tape
N / 25 mm 25
Temperature range of usage
°C

From -40 toi +100

 

Storage and installation conditions

•    Before usage it is recommended to make sure whether the tape is suitable for usage for intended purpose, i.e. whether it is chemically compatible with paints, coating, etc.
•    In order to receive the ideal adherence, the surface has to be dry and clean (without any dirt, fats or solvents).
•    The tape is cut by sharp and safe cutter or scissors.
•    It is recommended to use at ambient temperature above 0°C.
•    The tape’s rolls have to be kept in their original package in clean and dry environment. The storage temperature has to be between +10°C and +30°C, and the direct sunlight must be avoided.

Made by DuPont™, Luxembourg